J-Link EDU

 

Keil yada destek veren herhangi bir IDE altında kullanılabilir. Seri üretim amaçlı olarak J-Flash programı ile kullanamazsınız.

 

Low-cost J-Link for educational purpose

 

 

J-Link EDU

    Low-cost J-Link for educational purpose J-LINK EDU is identical to J-Link BASE and offers the same functionality. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology.

 

 


Full J-Link Support
Unlimited Breakpoints

The unlimited breakpoints in flash memory feature can be used free of charge for evaluation. The evaluation period is not time limited. For commercial use a separate license is required.
Free Software Updates

As a legitimate owner of a SEGGER J-Link, you can always download the latest software free of charge. Though not planned and not likely, we reserve the right to change this policy. Note that older models may not be supported by newer versions of the software. Typically, we support older models with new software at least 3 years after end of life.
Supports concurrent access to CPU by multiple applications

J-Link allows multiple applications to access a CPU at the same time. This has numerous applications. J-Link commander can be used in parallel to a debugger, a tool to communicate via DCC can be used in parallel to a debugger or a visualization tool such as Micrium's u/C-Probe or SEGGER's kernel viewer embOSView. This feature is currently not available for Cortex A and R cores.
Crossplatform support

runs on Windows, Linux, Mac OS X. The MAC and Linux versions are fully usable, but limited to the following components:

J-Link Commander, command line GDBServer, shared library (DLL-equivalent)
Limitations
Licensing and Support

J-Link EDU may only be used for non-commercial purposes. J-Link EDU does not include support.

 

 

Specifications

Specification Value
Supported OS Microsoft Windows 2000, XP, 2003, Vista, 7 and newer 
Linux
Mac OSX 10.5 and higher
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5°C ... +60°C
Storage temperature -20°C ... +65 °C
Relative humidity (non-condensing) Max. 90% rH
Mechanical
Size (without cables) 100mm x 53mm x 27mm
Weight (without cables) 70g
Available Interfaces
USB interface USB 2.0
Target interface JTAG/SWD 20-pin
JTAG/SWD Interface, Electrical
Power supply USB powered
Max. 50mA + Target Supply current.
Target interface voltage (VIF) 1.2V ... 5V
Current drawn from target voltage sense pin (VTRef) < 25µA
Target supply voltage 4.5V ... 5V (if powered with 5V on USB)
Target supply current Max. 300mA
Reset type Open drain. Can be pulled low or tristated
Reset low level output voltage VOL <= 10% of VIF
For the whole target voltage range (1.2V <= VIF <= 5V)
LOW level input voltage (VIL) VIL <= 40% of VIF
HIGH level input voltage (VIH) VIH >= 60% of VIF
For 1.2V >= VIF <= 3.6V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 10% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 90% of VIF
For 3.6 <= VIF <= 5V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 80% of VIF
JTAG/SWD Interface, Timing
JTAG speed Max. 15 MHz
SWO sampling frequency Max. 7.5 MHz
Data input rise time (Trdi) Trdi <= 20ns
Data input fall time (Tfdi) Tfdi <= 20ns
Data output rise time (Trdo) Trdo <= 10ns
Data output fall time (Tfdo) Tfdo <= 10ns
Clock rise time (Trc) Trc <= 3ns
Clock fall time (Tfc) Trc <= 3ns

 

Yorum Yap

Lütfen yorum yazmak için oturum açın ya da kayıt olun.

J-Link EDU

  • Marka: SEGGER
  • Ürün Kodu: J-Link EDU
  • Stok Durumu: Stokta var
  • Fiyat : 320,00TL
  • KDV Dahil : 377,60TL

Etiketler: J-Link, EDU, J-Link EDU, Arm, Jtag, Debugger, Programmer